Excavator Hydraulic Pump Sany215-8 Hydraulic Plunger pump piston pump

Product Description

Product Description

Composition and principle of hydraulic pump

The hydraulic pump of excavator is the core component of the hydraulic system of excavator, which undertakes the important task of transporting hydraulic oil and providing power. Its efficient stability and reliability provide a strong power support for excavators.
Component composition:

Pump body: The pump body is the main part of the hydraulic pump of the excavator, usually made of high strength cast iron or cast steel. High pressure chamber and low pressure chamber are designed inside the pump body. Through the structure of the pump body, the suction and output of hydraulic oil are realized.
Drive shaft: The drive shaft is connected to the hydraulic pump and the excavator's engine or motor, and the power is transferred to the hydraulic pump to make it operate normally.
Rotor assembly: The rotor assembly consists of the main rotor and the slave rotor, located between the high pressure chamber and the low pressure chamber of the pump body. The meshing between the main rotor and the slave rotor forms a sealed working chamber to realize the suction and output of hydraulic oil.
Control valve assembly: The control valve assembly is used to control the start and stop of the hydraulic pump, as well as to regulate the output flow and pressure. These control valves are usually controlled by mechanical or electrical systems to ensure the stable operation of the hydraulic pump under different working conditions.
How it works:

The working principle of excavator hydraulic pump is based on the principle of volume change, usually using gear pump, plunger pump or vane pump and other types.

Oil suction stage: In the low-pressure chamber of the pump body, when the rotor assembly rotates, the volume of the low-pressure chamber increases to form a negative pressure area. At this time, the hydraulic oil is sucked into the pump body and enters the hydraulic pump through the oil suction port.
Oil pressure stage: With the rotation of the rotor assembly, the volume of the low pressure chamber gradually decreases, and the hydraulic oil is compressed and enters the high pressure chamber of the pump body. At the same time, the volume of the high pressure chamber gradually increases, pushing the compressed hydraulic oil to the high pressure pipeline of the hydraulic system.
Output stage: After the adjustment of the control valve assembly, the compressed hydraulic oil in the high pressure chamber is output to the hydraulic system to provide the required power for the excavator. The hydraulic pump continues to work to maintain a stable hydraulic oil output and ensure the efficient operation of the excavator.

Excavator hydraulic pump is the core component of excavator hydraulic system, its component composition and working principle together constitute its efficient and stable power output. Through the cooperation of the pump body, drive shaft, rotor assembly and control valve assembly, the hydraulic pump realizes the suction, compression and output of hydraulic oil, which provides a powerful power source for the various work of the excavator.

Product  advantages

As the core component of excavator hydraulic system, the performance advantage of excavator hydraulic pump directly affects the working efficiency and stability of the whole excavator. We are proud to introduce the excellent performance of the excavator hydraulic pump, it has a number of advantages to inject efficient and stable power for construction machinery, become your choice.

Excellent performance:
Our excavator hydraulic pumps use advanced hydraulic technology and high-quality materials to provide high flow and high pressure output for excavators. Whether in earthwork excavation, ore mining or heavy-duty load operations, hydraulic pumps are easily qualified to inject excellent performance into excavators and improve engineering efficiency.

Energy efficient design:
We pay attention to the energy saving performance of our products, and our excavator hydraulic pumps are designed to optimize the internal fluid dynamics and minimize energy loss. The efficient work makes the hydraulic pump not only save energy when running for a long time, but also reduce operating costs.

Stable and reliable operation:
Excavator hydraulic pumps use high-quality materials and precision manufacturing processes to ensure stable and reliable operation under high pressure, high temperature and harsh environments. Its durability and stability make the excavator maintain good working condition under various complex working conditions, and minimize the frequency of equipment maintenance and downtime.

Intelligent control system:
Our hydraulic pumps are equipped with intelligent control system to monitor the working status and parameters of hydraulic pumps in real time. Intelligent management enables you to detect potential problems in time and make adjustments accordingly, improving device reliability and security.

Strong adaptability:
Our hydraulic pumps are suitable for a wide range of excavator models and application scenarios and can be customized according to customer needs. Whether it is a small excavator or a large excavator, we can provide you with the most suitable hydraulic pump solution.

In the field of hydraulic pumps for excavators, we lead the innovative development of hydraulic technology and stand out for excellent performance, high energy efficiency and stable reliability. Our products provide powerful power for excavators and help the construction machinery industry achieve efficient operation and sustainable development. Choose our excavator hydraulic pump, bring excellent performance to your project, let the excavator show strong power, achieve a better future!

Product application range

First, intelligent technology:

Adaptive control: The future excavator hydraulic pump will be further intelligent and adopt adaptive control technology. It can adjust the output in real time according to the working condition and load of the excavator to provide more accurate hydraulic control and optimize the use of energy.
Autonomous operation: With the development of artificial intelligence technology, excavator hydraulic pumps may realize autonomous operation, sense the surrounding environment in real time through sensors and algorithms, and automatically complete work according to task requirements, improving work efficiency and safety.
Second, environmental protection and sustainable development:

Electric hydraulic pump: There may be more electric hydraulic pump technology in the future to reduce the carbon emissions and noise pollution of excavators. The electric hydraulic pump can use clean energy to drive and improve the environmental performance of the excavator.
Biohydraulic oil: Biohydraulic oil is a renewable hydraulic oil that can replace traditional mineral oil and reduce its environmental impact. Future excavator hydraulic pumps may use bio-hydraulic oil to achieve more environmentally friendly engineering construction.
Iii. Expansion of emerging areas:

Aerospace: The high performance and stability of hydraulic pumps for excavators may find new applications in the aerospace sector. It can be used in aircraft landing gear, flight control systems, etc., to improve aircraft performance and safety.
Marine engineering: The future excavator hydraulic pump may be extended to the field of Marine engineering, for seabed resource development, deep-sea exploration and other tasks, to help Marine science and resource utilization.

Technological advantage

In the field of engineering, excavator hydraulic pump is an indispensable key component, which plays a crucial role in the performance and efficiency of excavator. And we are proud of the excavator hydraulic pump, not only in quality excellence, but also with innovation to lead the trend, to bring you a compelling experience!

Perfect integration, efficient performance
Our excavator hydraulic pumps are carefully designed and optimized to blend perfectly with all excavator models. Its efficient performance enables your excavator to maximize its potential in a wide range of work scenarios and easily meet diverse construction challenges.
Intelligent control, intelligent control
Leading the development of intelligent hydraulic pumps, our products are equipped with advanced intelligent control systems. With intelligent control, you can monitor the working status of the excavator in real time and automatically adjust the output of the pump as needed, thereby improving construction efficiency and reducing energy consumption.
Lightweight design, flexible application
We pay attention to the light design of the product, reduce the weight of the pump, so that the excavator operation is more flexible. Whether it is a small working space or difficult terrain, our hydraulic pumps can help you complete construction tasks quickly, so that you can do more with less.
Rigorous testing, stable and reliable
In the production process, we carry out strict testing and quality inspection of the hydraulic pump to ensure its stability and reliability. You can rely on our products to deliver lasting and consistent performance under any conditions.
Customer first, personalized customization
We regard customer needs as our top priority and focus on communication and cooperation with customers. We offer customized solutions to help you stand out in the engineering field by creating the most suitable hydraulic pump for your excavator model and engineering requirements.
Excavator hydraulic pump, excellent quality, innovation leading. Choose us to give your excavator a new lease of life for a more efficient and smoother engineering experience!

certificate

Our products are in line with international standards and have obtained the Chinese quality trust unit

More products Show

If you have more needs, we can also provide you with customized services, our products are under continuous development to ensure the continuous needs of customers.

Our Services

Dear Customer,

Thank you for your interest and trust in our hydraulic walking device products and services. We are a company specializing in the production of high-quality hydraulic walking devices and have accumulated years of experience and technical expertise in this field. Our products are not only reliable in quality, but also perform well in terms of performance, safety and durability.

Our service concept is customer-centric, with the goal of meeting customer needs, adhering to the service philosophy of "integrity, professionalism, efficiency, and innovation", and always maintaining communication and exchange with customers to ensure customer satisfaction and trust. Our team is composed of experienced, skilled, and enthusiastic professionals who provide customers with comprehensive service support, including:

1. Customization of products: We can provide customers with customized hydraulic walking device products tailored to their needs and requirements to ensure that the products meet the customer's usage and environmental requirements.

2. Technical support: We have a professional technical team that can provide customers with technical support for product selection, installation and commissioning, maintenance and other aspects to ensure that customers can use our products smoothly.

3. After-sales service: We provide 7x24-hour after-sales service to ensure that customers can get timely solutions to any problems encountered during use.

Our products have been exported to overseas markets and have won unanimous praise from customers. We believe that through our professional technology and high-quality services, we can become your trusted long-term partner.

If you have any needs or questions about our products and services, please feel free to contact us. We will provide you with the best service and support and look forward to working with you!

Contact us

EMAIL:Bing83125@gmail.com                                                

Whatsapp:8619554163292 8615805343909

FAQ

1, Q: Are you a manufacturer or a trading company? A: We are a manufacturer of quality final drives located in Qingdao National High-Tech Industrial Development Zone with 14 years of production experience .

2. Q: What is your company size ? A: Ours factory covers an area of 70,000 square meters with 120 employees . Turnover of 2019 is 20 million USD .

3, Q: What certificate do you have? A: ISO9001 / EN ISO 12100 / OHSAS 18001 / SGS

4, Q: How long is your delivery time? A: We keep stock for conventional products . New orders to produce takes about 20 days. Customized products takes about 40 days .

5, Q: What kind of payment terms do you accept? A: T.T. / DP at sight / LC .

6, Q: What is your warranty policy? A: All our products are warranted for one full year from date of delivery against defects in materials and workmanship.